Quick access to drawings

The catalog allows quick navigation via the drawings. Depending on requirements, you can change the drawing view with a click.

Use the toolbar of the selected assembly.

Show drawings in the overview or individually

	A click on the corresponding icon changes the view of the assembly drawings.
	Overview of all drawing sheets Alternatively, you can click on the desired drawing to switch the view.
	Show drawings individually

You can apply a general setting for the catalog under Settings for the parts catalog.

Show all drawings from one level lower

The drawings of the assemblies, which are one level lower than the selected assembly, are displayed.

All drawing pages of the current assembly

Changes to the drawing view of the current assembly.

Change 2D / 3D view

See 3D / 2D view

Toolbar for drawings

Select section in the drawing

As long as the Select section function is enabled, you cannot select hotspots on the drawing.
As soon as you deactivate the function, you can select hotspots.

Rotate drawing

Applies to TIFF/PNG drawings.

Sometimes drawings are not rotated correctly for viewing in the catalog.

The rotation button in the toolbar for drawings allows the drawing to be rotated clockwise in 90 degree increments.
Previously selected hotspots and parts list entries remain selected even after rotation.
The rotation is canceled when you
- change the assembly.
- scroll between drawings of an assembly.

Drawing before rotation